AKKRO-7T is a non-redispersable, liquid bonding admixture used to produce polymer modified concrete and mortar. AKKRO-7T is a milky white, water based emulsion of high solids acrylic polymers and modifiers. AKKRO-7T is non-yellowing and has excellent resistance to ultraviolet degradation, heat and most common chemicals. AKKRO-7T does not alter the colour of the mixture.
DURAL 100 M is a two-component, moisture insensitive, 100% solids epoxy adhesive for use as a bonding agent for precast segmental box girders, bridge and other segmental construction.
DURAL 106 M is a two-component, moisture insensitive, 100% solids epoxy adhesive for use as a bonding agent for precast segmental box girders, bridge and other segmental construction.
DURAL 452 LV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates.
DURAL 452 GEL is a two-component, 100% solids, non-corrosive, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a non-sag adhesive.
EUCOPATCH 20 is a single-component, polymer modified repair mortar for use on new and existing concrete and masonry surfaces. This product is designed for the reconstruction of damaged vertical and overhead concrete and masonry structures, both interior and exterior. EUCOPATCH 20 can also be used in light-duty, pedestrian, horizontal applications.
EUCOPATCH P is a one-part cementitious bonding agent and anti-corrosion coating for reinforcing steel. It contains silica fume combined with portland cement that can be used as a bonding agent for placing fresh concrete and repair mortars to existing concrete substrates. EUCOPATCH P contains a corrosion inhibitor which protects reinforcement when used as an anti-corrosion coating for steel. EUCOPATCH P has a long open time, is non-flammable and does not form a water vapour barrier after cure.
FLEX-CON is a water dispersion of an architectural grade acrylic latex specifically designed for modifying portland cement compositions. Mortar modified with FLEX-CON has improved physical strength, and superior adhesion to old concrete, masonry, brick, and many other surfaces.
SBR LATEX (M) is a synthetic rubber emulsion to adding to cement mortars where good adhesion and water resistance are required. It is suitable for tropical conditions. SBR LATEX (M) is a high quality emulsion that substantially increases the qualities of cement mortars such as; thin layer patching, renders, screeds, concrete repair, tile fixing mortars and abrasion resistant linings.
TAMMSWELD is a re-wettable liquid bonding agent and polymer modifier for concrete and cement mortars. TAMMSWELD is a high film build, ethylene vinyl acetate copolymer emulsion.
|DURAL 100 M||System Datasheets|
|DURAL 160 M||System Datasheets|
|DURAL 452 GEL||System Datasheets|
|DURAL 452 LV||System Datasheets|
|EUCOPATCH 20||System Datasheets|
|EUCOPATCH P||System Datasheets|
|SBR LATEX (M)||System Datasheets|